MTEC Drilled and Grooved Rotors

MTEC Drilled and Grooved Rotors are quality sport performance rotors with moderate pricing available in black, silver or gold protective finish. Protective finish on MTEC rotors is UV resistant, brake fluid resistant, hard wearing, it has high anti corrosion properties and it's high gloss finish matches your wheels. These rotors are OEM size, 280mm front and 258mm rear and are direct replacement for stock plain rotors. Please consider the min. thickness of the rotor for safe driving, marked on the outer edge.

MTEC rotors use the grooves and holes to clean the surface of the pad to give your Tiburon a clean braking surface for more surface area for the braking surface providing quicker stops. Drilled & grooved rotors provide great breaking and less brake fade due to less heat build up.

NOTE: When new the protective finish will cover the complete disc surface, but after a few hours the contact area with the pad will remove this finish and expose the metal underneath.

You can choose between five different rotor options:

-drilled

-grooved

-drilled&grooved

-dimpled&grooved

-C-hook

Front Rotor Specification:

Vented - Studs 5
Disc diameter 280.0mm
Disc thickness 26.0mm
Overall height 47.4mm
Centre diameter 69.0mm
Minimum thickness 24.4mm

Rear Rotor Specification:
Solid - Studs 5
Disc diameter 258.0mm
Disc thickness 10.0mm
Overall height 45.4mm
Centre diameter 76.0mm
Minimum thickness 8.0mm

PRICES DON'T INCLUDE SHIPPING AND IT RANGES FROM $20-$40 TO EUROPEAN COUNTRIES. FOR ACCURATE SHIPPING TO SPECIFIC COUNTRY AND OTHER AREAS PLEASE EMAIL US! SHIPPING RATE IS THE SAME FOR TWO OR FOUR ROTORS.